Ten Minutes or Less: Cleaning Your YETI Cooler in the Year 2022

I love going away for the weekend.

It's much more enjoyable to pack for a trip than to unload everything after the adventure is complete.  

Especially now that your YETI needs a thorough cleaning and is a mess  

Here, I'm going to show you how to clean and freshen up your YETI cooler if it's just a little bit grubby. And I'm also going to demonstrate how to remove those stains if it's a big, old Tundra 75 that's a complete mess.  

By the end, you'll be able to clean a YETI cooler in no more than ten minutes, allowing you to unwind.

What You'll Need for YETI Cooler Cleaning

It all depends on how filthy or stained your YETI is. The majority of the following—which you probably already have lying around—will not be required.

• Dish soap
• Sponge that won't scratch
• Bleach
• A magic wand
• Power washer

How to Disinfect a YETI Cooler and Get Rid of Sticky Stains and Odors

When you have the proper tools, cleaning a YETI cooler is a simple and quick task.

Naturally, there are different degrees of dirtiness when it comes to coolers: if you've been camping and your cooler has some dirt on it and a faint odor inside of it You won't need to take as drastic of measures as if you had quartered a deer and kept it in the cooler all night.

This guide is divided into the types of muck your YETI cooler may encounter.  

In the first step, use a non-abrasive sponge, warm water, and dish soap.

Often, this is all you need if your YETI cooler is only moderately dirty. Particularly if your YETI has no stains-causing scratches

Treat your YETI like a large pot that needs cleaning after dinner when all you're up against is some dirt and a sticky interior. Fill the bottom of the cooler with warm water, add a few sprays of dish soap, and wash the entire cooler inside and out with a non-abrasive sponge. I clean mine in the bathtub, but an outdoor hose also works.

You don't want to scratch your cooler, so you should stay away from using steel wool or any other abrasive material. Although it might appear cleaner at first, the next time you go outside, it'll have much more dirt and grime.

Step 2: Soak in a 6:1 bleach solution.

Use this step only if your YETI has an unpleasant odor that won't go away with soap and water. If there is still a smell, I would wash the inside twice with soap and water before using bleach.

Six parts water should be added to one part bleach. This measurement doesn't need to be exact, but it's important to avoid using too much bleach because it's unnecessary and it could result in an overpowering bleachy odor.  

Your YETI should soak in the bleach and water mixture for at least an hour before being dumped out and rinsed. That ought to get rid of any off-putting odors in your cooler.  

Third step: apply a magic eraser

This is compatible with all YETI coolers, but it works particularly well with white YETI coolers.  

Pick up a standard Magic Eraser and work it into the stains and marks there. Stains that were resistant to the effects of soap, water, and bleach should be simple for you to remove. It's pretty amazing, but I have no idea what's in those Magic Erasers.  

The quickest and simplest way to remove stubborn stains from your Yeti is with magic erasers, which won't help with smell.  

Use a pressure washer in step four.

This is by far the simplest method for cleaning your Yeti if you have access to a pressure washer or know someone who does.  

It's also the first action I'd take if I had just returned from a hunting or fishing trip with my YETI.  

Start blasting with your pressure washer after setting it to about 75% of its capacity. While the water isn't strong enough to damage the plastic on a YETI, it is undoubtedly sufficient to remove dirt and stains.  

However, a pressure washer won't get rid of odors, so you might want to proceed with the bleach soak described in step two.  

How to Clean a YETI the Best

For the majority of my trips, I simply wash my YETI with some soap and water; it only takes three minutes. I also don't require any special equipment.  

However, I went fishing with my YETI and the inside of the container has some strange odors. All that was required was a small amount of bleach and some time spent soaking.  

Use a pressure washer on a seriously soiled, stained, or battered-looking YETI. Once a few passes have been made, you'll be surprised at how good it looks. I've witnessed individuals restore a white Yeti that was practically red from dirt and clay to like-new condition in five minutes.  

Additionally, if you don't have a pressure washer, simply clean the stains with soap and water before finishing with a Magic Eraser. It works like magic and can make even the dirtiest Yeti appear as though it was just purchased.  

FAQs